D1162BH-04-04
1/4" PTC x 1/4" BH PTC - DOT Bulkhead Union - DOT Push-To-Connect - Brass
Details
Details
• D.O.T. Push-To-Connect Bulkhead Union
• BH PTC x PTC
• 1st) 1/4" Bulkhead Push-To-Connect
• 2nd) 1/4" Push-To-Connect
• CA 360 Brass Construction
• D.O.T. is Stamped into Each Colar
• Brass Tube Support & Grippers
• O-Ring Seal: Nitrile Rubber NBR-269
• Performs to D.O.T. FMVSS 571.106 Requirements
• Meets SAE J1131 and SAE J2494-3 Performance Requirements
• Use with SAE J844 Nylon Tubing
• Working Pressure: Vacuum to 150 PSI
• Temperature Range: –40° to +200° F (–40° to +93° C)
Warning: This Product can expose you to chemicals including Lead, which is known to the State of Californina to cause cancer, birth defects or other reproductive harm.
For more information go to (www.p65warnings.ca.gov).
• BH PTC x PTC
• 1st) 1/4" Bulkhead Push-To-Connect
• 2nd) 1/4" Push-To-Connect
• CA 360 Brass Construction
• D.O.T. is Stamped into Each Colar
• Brass Tube Support & Grippers
• O-Ring Seal: Nitrile Rubber NBR-269
• Performs to D.O.T. FMVSS 571.106 Requirements
• Meets SAE J1131 and SAE J2494-3 Performance Requirements
• Use with SAE J844 Nylon Tubing
• Working Pressure: Vacuum to 150 PSI
• Temperature Range: –40° to +200° F (–40° to +93° C)
Warning: This Product can expose you to chemicals including Lead, which is known to the State of Californina to cause cancer, birth defects or other reproductive harm.
For more information go to (www.p65warnings.ca.gov).
Crossover Part Numbers
Eaton-Weatherhead: 1874x4
Parker: 62PMTBH-4
Specs
Fluid Product: ConnectionProduct Type: D.O.T. Push-To-ConnectsMedia: Hydraulic/PneumaticMaterial: BrassOrientation: StraightTube O.D.: 1/4"
1 - Thread Type: Bulkhead PTC1 - Size: -04 (1/4")1 - Thread: 0.250" I.D.2 - Thread Type: Bulkhead PTC2 - Size: -04 (1/4")2 - Thread: 0.250" I.D.
Working PSI: 150Burst PSI: 600Working BAR: 10Burst BAR: 41